Nistune Flex Fuel Conversion Kit

A solder-in solution to allow supported Nissan ECU's to become flex-fuel capable. ∗ 

- Converts the 50-150Hz frequency from Ethanol Content Sensor to a 0 - 5 volt range.

- Suitable as a replacement for the Zeitronix ECA-2 when an external display is not required. Note: This kit only provides an analog voltage output. It cannot be used with Zeitronix or similar Ethanol display units.

- Kit includes NIStune flex fuel interface board and 4.5m cable to connect to Ethanol Content Sensor.

- Requires your NIStune board to be running "Feature Pack" firmware.

- Ethanol Content Sensor sold separately